• Innovative coating technology

    Innovative coating technology

    Custom solutions innovated specifically for industries Read More
  • HVOF innovative thermal spray

    HVOF innovative thermal spray

    Coatings for an Extensive Array of Applications and Industries Read More
  • Engineered Coating Solutions

    Engineered Coating Solutions

    We protect and recover your mechanical components Read More
  • Plasma innovative thermal spray

    Plasma innovative thermal spray

    Ceramic, carbide and super alloy coatings to protect mechanical parts Read More
  • 1
  • 2
  • 3
  • 4
  • Hard Chrome Replacement Coatings

    In the production of hard chromium plating hexavalent chromium oxide is produced. Hex chrome is a well known carcinogen. Industries that generate hex chrome currently face strict occupational and environmental regulations, and the regulations for hex chrome are
  • Wear resistant hard coating

    Among the many coatings that we apply at TSS are certain hard coatings that are engineered and designed for various wear applications.Such coatings are applied utilizing advanced processes such as HVOF or Plasma spray. Read More
  • Repair & Dimensional Restoration

    The equipment and parts in every industry are subjected to abrasive wear and/or corrosive and erosive wear. The affected components can usually be repaired applying a thermal spray coating to restore the part to original dimension. Read More
  • Applications-Coating materials

    Tungsten carbide is one of the most wear resistant materials which can be applied via the plasma spray or HVOF processes. We can achieve a hardness approaching or exceeding 70RC. Additionally, tungsten carbide can be ground and polished
  • Corrosion Protection

    The corrosion of components is a pervasive problem which destroys or reduces the structural integrity of equipment and parts used in all industries and in all environments. Our coating solutions can tackle any wear and corrosion concerns that Read More
  • Rods, plungers, shafts and sleeves

    We provide turnkey thermal spray coated components such as shafts or sleeves.By giving customers this option, they can enhance their supply chain management, and save time and money, by reducing their supplier base, better control their inventories, while Read More
  • 1
  • Chromium Carbide
  • Ceramic
  • Bronze Spray
image

Thermal spray materials

Chromium Carbide

Coatings material is a blend (75/25) of very fine particles of chromium carbide and nickel chromium powders. When properly sprayed using the HVOF process, it produces coatings which are very hard, dense and well bonded. Because of its unique combination of properties, HVOF Chromium Carbide is recommended for resistance to wear by fretting, abrasive particles and hard surfaces in the temperature range 540°- 815°C (1000°-1500°F).

HVOF Chromium Carbide coatings are dense (less than 1/2 volume percent porosity) and well bonded (tensile bond strength in excess of 12,000 psi, 83 MPa). These coatings, however, may be best characterized by their high macro and microhardness which translates into excellent high temperature wear resistance.

image

Thermal spray materials

Plasma Tungsten Carbide

Coatings material is a fine grade tungsten carbide-cobalt aggregate powder forplasma spray. It produces the best coatings for low temperature wear resistance of alltungsten carbide powders. These coatings are recommended for resistance to wear byabrasive grains, hard surfaces, fretting and particle erosion.

image

Thermal spray materials

Aluminum Bronze

Coatings material is a fine grade aluminum bronze powder. When sprayed with the HVOF process, dense, high bond strength coatings are produced. These deposits can be readily machined, milled, drilled/tapped or otherwise finished. This unique set of physical properties makes Aluminum Bronze ideally suited to restoration of worn or mis- machined non-ferrous components. This coating is recommended for soft bearing applications and to resist wear by fretting, hard surfaces and cavitation.

HVOF Sprayed Aluminum Bronze coatings are harder and exhibit a higher tensile bond strength than standard aluminum bronze deposits. The as-sprayed surface finish is also finer than comparable standards. These data reflect the higher coating density, improved bonding and superior coating integrity which results from the HVOF process.

User Registration
Cancel
  • What is HVOF coating? +

    HVOF is a thermal spray system utilizing the combustion of gases, such as Hydrogen or a liquid fuel such as kerosene. Fuel and oxygen mix and atomize within the combustion area under conditions that monitor the correct combustion mode and pressure.The process creates a very high velocity which is used to propel the particles at near supersonic speeds before impact onto the substrate. One of the basic rules of spraying is that high combustion pressure = high gas velocity, high particle velocity and resulting high coating quality.One of the key benefits
  • What is Plasma (APS) spraying? +

    The plasma spraying process involves the latent heat of ionized inert gas (Plasma) being used to create the heat source. The most common gas used to create the plasma is argon. This is referred to as the primary gas. (See What is Plasma). Argon flows between the electrode and nozzle. A high frequency or high voltage alternating electric arc is struck between the nozzle and the electrode, which ionizes the gas stream. By increasing the arc current, the arc thickens and increases the degree of ionization. This has the effect
  • What is thermal spraying? +

    Thermal spraying, also commonly known as metal spraying is a surface engineering / coating process where a wide range of metals and ceramics can be sprayed onto the surface of another material.
  • 1
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
Ok